-
Specifications
Size: 3.8 inches
Material: Class
Technical principle: four-wire resistive screen
Interface mode: plug-in
Features
Intermec 700C, 741, 751, 761 touch screen adopts membrane + glass technology. It has high demand for display area (functional area) in production. The functional area can’t be too large, otherwise the front case can easily buckle the function area, resulting in the touch screen not working. IBARCODESOLUTIONS Co., LTD has undergone rigorous testing during production and has been carefully compared to ensure that the display area is of the same size and function properly. Secondly, the socket of the cable should not be too wide during production, otherwise it will be difficult to insert or remove during insertion. The last thing to note is that the touch reinforcement sheet should not be too thick, otherwise it will be difficult to insert, remove and replace.
The Intermec 700C, 741, 751, 761 touch screens from IBARCODESOLUTIONS have been rigorously tested and carefully compared to ensure consistent dimensions, normal functionality, and a thick glass material of approximately 1.4 mm. The touch screen is relatively flexible, and the cable breakage does not occur because the cable is too hard when installed. And the film and back adhesive have a pull ring for customer convenience.
Installation guide
Intermec 700C, 741, 751, 761 touch screen and Symbol SPT1800 touch screen are both glass materials, the edges and corners are sharp, so be careful to prevent scratches during installation. To correct the position, pay attention to the angle when bending the flex cable ribbon. After the installation is completed, the tip of the pen that does not conform to this specification can’t be used to operate the touch panel to prevent scratching.
